Posts by StanMalinowski

StanMalinowski · Restoring Factory Settings & Rigs StanMalinowski December 19, 2013 at 3:16 PM

Could not find this in any of the manuals.

How do I restore my KPA back to Factory Settings (including rigs/presets/etc)?

Thanks in advance!

StanMalinowski · Newbie Question StanMalinowski December 1, 2013 at 7:17 PM

Sorry, here is another dumb Newbie Question.....

I have downloaded & purchased a number of profiles. Many of the profiles when loaded have all of the Tone Knobs at 12 o'clock.

I am questioning what this really means:

1) The Company/Individual actually had the tone knobs on the amp being profiled set flat. Adjustment of the tone knobs on the KPA increase/decrease tone from the flat frequency 12 o'clock position.
or
2) The amp being profiled had its tone knobs set at non-flat for the best tone and the profiling process sets the tone knobs on the KPA to 12 o'clock and adjustment to the KPA tone knobs adds or subtracts from the optimal tone settings that were profiled.

StanMalinowski · Expanding KPA Backup File StanMalinowski November 17, 2013 at 11:04 PM

Thanks Ingold!

Did exactly what I wanted.

StanMalinowski · Expanding KPA Backup File StanMalinowski November 17, 2013 at 9:21 PM

Newbie Question:

Can a KPA Backup File be expanded on a PC into all of te individual profiles?

StanMalinowski · Bulk & Favorites Delete StanMalinowski November 17, 2013 at 5:24 PM

Thank you Master viabcroce!

Which menu item do I look for?

StanMalinowski · Bulk & Favorites Delete StanMalinowski November 17, 2013 at 4:29 PM

Sorry if this is covered in another thread I missed, or in some section of the manual I missed.

1. Is there anyway to remove rigs from your "Favorites", but not from the KPA
2. Is there anyway to do a bulk delete of your non-Favorite Rigs?

StanMalinowski · MXR Phase90 Presets for the KPA StanMalinowski November 12, 2013 at 12:16 AM

I imported the Stomp Folder Files (Stomps Folder Files were already imported) & I now see MXR in the Stomp Preset screen.

The key appears to be that you must Import BOTH the Stomp & Stomps Folder Files.

Thanks to all!

StanMalinowski · MXR Phase90 Presets for the KPA StanMalinowski November 11, 2013 at 8:03 PM

I only imported the 7 files in the Stomps Folder.

Should I import files from BOTH the Stomp AND Stomps Folders?

I have Imported about 100 Profiles and the MXR is the only one I have had an issue with.

StanMalinowski · MXR Phase90 Presets for the KPA StanMalinowski November 11, 2013 at 11:09 AM

Shared Folder.

The KPA does acknowledge successful imports ever time I have attempted to Import the MXR.

StanMalinowski · MXR Phase90 Presets for the KPA StanMalinowski November 10, 2013 at 11:05 PM

Whoops, KPA SW Version is 2.1.1.x!

I renamed one of the Stomps file and Imported into the KPA.

No luck, it does NOT appear in either the Stomp Box or Preset Lists.

When I import the file the KPA confirms "1 Rig Imported". I even looked in the Last Imported Rigs area, still no success.

StanMalinowski · MXR Phase90 Presets for the KPA StanMalinowski November 10, 2013 at 10:10 PM

I imported ALL 7 files from the Stomps directory. I looked in the Stomp Box menu (Left side knob above screen). Still no MXR!

I tried importing the same 7 Stomps files for a second time, the KPA said the files were already imported.

BTW, I am using SW Version 1.8.x, do I need to upgrade?

Should I rename 1 of the 7 Stomps files and try just importing that one?

StanMalinowski · MXR Phase90 Presets for the KPA StanMalinowski November 10, 2013 at 7:48 PM

I am looking thought the Preset Menu......

1. Pick an Empty Stomp Box Button & Hold until it flashes
2. Use the Preset Browser (Knob on the right hand side above the screen
3. I see the Tube Screamer Preset that I created in the list
4. There are no MXR entries in the Pha section, Closet I found was Pha Eddy

StanMalinowski · MXR Phase90 Presets for the KPA StanMalinowski November 10, 2013 at 11:10 AM

"Did you look under Pha MXR ?"

No Pha MXR, could it be Pha Eddy?

StanMalinowski · MXR Phase90 Presets for the KPA StanMalinowski November 10, 2013 at 12:31 AM

Just got my KPA 2 weeks ago and am loving it! Having a great time exploring profiles and the KPA in general.

Having a bit of a problem with the MXR Phase 90 effect. I was able to download/unzip/load to the KPA. The problem is that I can't find the MXR 90 preset anywhere in any of the stomp menus. Hope somebody here can give a roadmap & directions to the "missing" MXR effect.

Thanks in advance.