Please describe your problem more detailed.
Do you use the Lock function for swapping cabinets?
I can tell that locking cabinets (or amps) does not work properly using the new profile format.
This is not a bug, but a consequence of the new format and the fact, that the separation between amp and cab with old profiles is not done the same way as with new profiles.
This problem can be avoided by only using rigs of the new format. Every rig that is simply stored while the new format is activated, will appear in the new format.
Thanks for the feedback! ![smile :)](https://forum.kemper-amps.com/wbb/images/smilies/emojione/263a.png)
I've locked cabs sometimes, and sometimes not. It's kinda hard to backtrack every detail when you realize
something is wrong after you've done a lot of other things in between. I basically had to start from scratch in
order to reproduce some issues and get it detailed enough to be useful for you (hopefully). I've sent a report
to Burkhard via email, but I'll post what I've found so far here as well:
The cabinet listing is buggy when you browse the list of cabinets from other rigs.
Let's say you have several variations of the same name/rig such as this:
Mesa
Mesa 1
Mesa 2
This is listed correctly in the cabinet presets, but in cabs from other rigs it's like this:
Mesa 1
Mesa 2
Mesa
No problem with different sorting - but you actually *get* and *hear* the cabinets as
listed in the first example, meaning that if you select "Mesa 1" from another rig, then
you actually hear and get "Mesa" instead.
If you save this as a new rig, it will have the wrong cabinet, but you won't hear it
until you enter the cab section and edit a parameter (High/Low Shift or Character).
Once you touch one of those parameters, the real cabinet sound is revealed... ![smile :)](https://forum.kemper-amps.com/wbb/images/smilies/emojione/263a.png)
The only thing I'm not sure of is if the actual cabinet is wrong or if it's just settings
as I tested with variations of the same cabinet.
Another issue that I can reproduce here:
Saved rigs aren't showing in the cabinet list of "From Rigs" after saving a rig using
"Store As". I have to store it again using "Replace" to get it to show in "From Rigs".
I have Replaced all rigs to make sure it's correct here, but I got curious and took a
peak at my previous backup. Please have a look at the attached image below.
All rigs starting with a number are saved the last days after I got some 2.8 based
profiles from another Kemper user. The file sizes may indicate that some of these
rigs aren't saved correctly, but they all worked. I just wonder if files may be saved in
the old format when using "Store As", and corrected to the new format when using
Replace. All the rigs in my last backup are at least between 5700 and 5800 bytes
after replacing all the rigs that first were saved using "Store As".
Both these issues are tested and reproduced using v2.8 files without any lock. One
possible exception is the smaller file sizes in some rigs as I can't remember if I had
the lock function on or off at the time I saved those rigs.
I will do another test tonight where I check what happens when using "Store As" in
order to see if there's a connection with rigs/cabs not showing up in the "From Rigs"
list and the smaller file sizes.
Hope this helps, and please ask if something is unclear! ![smile :)](https://forum.kemper-amps.com/wbb/images/smilies/emojione/263a.png)
Cheers,
Tobben