If anyone wants to try out a newer Stage with original box, manuals etc. in excellent condition here is your shot. I have about 3000 paid profiles from over the years. $1550 shipped to US - (payment fees if applicable not included).
Posts by bshaw92
-
-
Not sure if this does it for you, but I've got a 4 button switch I use to control additional things.
Next step would be midi?
-
I don't with that specific one, but I do with this one.
[Blocked Image: https://images.reverb.com/image/upload/s--pO3qotJ9--/f_auto,t_supersize/v1567045850/o6u6nqus1zgkayihyfsr.jpg]
Got it off Reverb. Works the same way, which is great. Actually puts the two rows in-line with the lower lines on the remote/stage.
-
I’m not getting any output on the 1/4” monitor outs, any ideas?
Also,
Make sure you are connecting to the lower 1/4" outputs. The upper are still main. I did this last night into a SS amp and cabinet and couldn't figure why the volume didn't go down when I turned the volume down. I was thinking the right two monitor outs were inline vertical. I was wrong. The lower two are the monitors. Re-plugged in correctly and everything worked right.
-
Yes. Have my Head set at -18db and my stage at -12db +/-.
-
I would like to have the option for an additional effect/stomp (i.e. channel) in each slot that can be initiated by a press and hold. Also, have the space reverb within the cab block so the reverb slot isn't taken by adding space.
-
Selling my powerhead with remote and Pelican 1610 case (Olive) in excellent condition. I also have a Stage and keeping it as it's easier and less number of parts.
$SOLD + shipping to US. If you are located near Indiana I can possible meet you for drop off.
-
Put a skin on the front that makes it look like an amp head.....
-
If they are tube purists then make the best of both worlds and run your powerhead into a cabinet and let them mic it. You can have whatever amp you want and you already have the gear.
-
-
I have done this with an Orange OR15 and an EVH 5150 III and worked out pretty well. I also did it with a Dr Z Route 66 and a Ceriatone C2555 (Jube Clone). Like both of them and use them.
-
Wouldn't it be nice to have the speaker imprints available on the Main Outs (as an option) too?
Yes, 100% wish.
-
the Imprints only work with the Kone, they would likely sound terrible through FOH
This is not correct. If you try them you will love them through FRFR and FOH. They sound great with a little eq adjustment. They bring back the spongey feel you get from your tube amp that some of the mic/mid compression removes in the profile. It has made me keep my profiler.....
-
How are they different?
The Kemper cab portion of the profile has the speaker impedance included when profiling with a mic/cab/amp. The Axe now has an impedance option, but most IR's did/do not include the speaker impedance. You may find some difference, but you may prefer it?
-
-
rdwilson I'm next door to you in Indiana. If you mail me the toaster I can update it and mail it back. It will take 1 day from you to get to me. I'll update it the day I get it and send it back the same day time allowing. Send me a PM and I can send you a text or whatever you need to get it done. Maybe even facetime would work?
-
-
With the new updates have yall tried this yet? I didn't see any discussion currently on it...
I started a thread a couple days ago on the very subject with a poll.
-
-
I've mentioned this a couple times in another thread, but I would encourage you to try the new Kone imprints through your FR system and see what you think.
Sweetness and Directivity around 2-3 have worked pretty good.
Let me know what you think.....