Tone Junkie offered a point of discussion that latency may be effecting the value being arrived at through null testing. The fundamental configuration of null testing requires no latency variations of the two samples being processed in the test. This is simply not possible and may be degrading the accuracy of null testing.
Did you somehow end up in the wrong thread? 
Hopefully this thread can stay focused on whether or not the beta latency might improve (and not your personal feelings about when latency is or isn't important for your situation).
I am for 0.3 ms total latency.
What is there to discuss about it?
Should we force the developers to do it?
I think they are also trying to achieve the shortest time.
It's like everywhere in life, a compromise.
the LED indicators for the Rig Buttons have started turning yellow
A picture is worth a thousand words
I trust that Kemper trusts Thomas
I also think he's a nice guy.
Company profiles are a company's business card.
They're usually the first thing a new user hears.
Regardless of who created them.
I think if you download the free Dill Rigs 2.0 rigs on RigExchange that Thomas Dill has uploaded you will have some examples that will live up to, if not surpass, that level of quality long after any ‘official’ rig packs have released.
You don't trust Kemper to create good profiles?
It will happen. It’s just a matter of time.
I’m a huge fan of calendar quotes. 
Nothing like a random Tuesday telling me to ‘follow my dreams’
I’d really appreciate an official Kemper factory content pack featuring high‑quality 2.0 profiles.
It would help me better understand what the developers themselves consider good 2.0 profiles.
I think that's a known issue, a moderator already started that they'll fix that soon.
I haven't found any statement from a moderator on the topic.
Please give me the number of the post in which it happened.
Thank you 
ASIO problem with Beta v14.02 (Reaper and Rig-Manager)
When I have the Rig-Manager open, the ASIO driver no longer works in Reaper.
When I close the Rig-Manager, it works again.
The PROFILER->Audio Mode is set to Native Audio (ASIO).
• Tauschen: Wenn du ein Rig mit der Maus ziehst, das gerade nicht aktiv ausgewählt ist (kein Kopfhörer-Symbol), tauschen die beiden Rigs einfach die Plätze. Das ist genau das, was du beobachtet hast.
• Ersetzen: Wenn das Rig, das du ziehst, gerade aktiv zu hören ist (Kopfhörer-Symbol leuchtet), wird das Rig am Zielort durch das gezogene Rig ersetzt und somit gelöscht.
Ich habe noch ein "ersetzen" gefunden.
Wenn du ein Rig mit der Maus ziehst, das gerade nicht aktiv ausgewählt ist (kein Kopfhörer-Symbol), und das Ziel-Rig das aktive Rig ist (Kopfhörer-Symbol leuchtet) wird das Ziel-Rig ersetzt.
Wer sich das wohl ausgedacht hat?
Display MoreOk, my setup doesn’t allow me to calibrate and fine tune the mic cab combination for the “perfekt” sound and I personally prefer direct profiles, but I will create and check quick and dirty studio profiles.
Perhaps 2.0 and classic
PS: since the last 1.0 profile 7 years are gone… therefor my studio moved from ground to 2nd floor and the cabinets in the basement are far away - no problem with XLR but a real problem without motor driven control of the mic(s).
That’s why my profiles will be more like a quick live setup with one mic.
On the other hand I could also test how direct profiles are influenced by different speaker.The speaker and output transformer interaction depends on the impedance resonance of the speaker (between 50 and mainly 75hz)
The resonance of the 2.0 cabinet i suppose is an acoustic resonance factor or a mix of both. If it’s a mix this is not easy to separate!
A monologue, or an answer to what? 
I must report that Rig Manager consistently crashes upon every exit on macOS, indicating a significant stability issue in the current build.
I must report that this problem was not mentioned in over 500 posts, which indicates a significant stability issue with your devices.
Perhaps you also just want to spread a little bad mood.
wie finde ich die Firmware Version beim Player?
Das ist deine Firmware: OS Release 13.0.5.61298
Ich habe die Beta-Version (4.0.56) des Rig-Manager installiert.
Wenn ich die Position innerhalb des Players ändern möchte, habe ich nur die Funktion "tauschen" gefunden.
Ich wähle ein Rig mit der linken Maustaste (gedrückt halten) und ziehe es über ein anderes Rig und lasse los.
Dann tauschen die beiden Rigs die Positionen.
Es wird nichts überschrieben, sondern nur getauscht.
Ob das mit deiner aktuellen Rig-Managerversion auch so funktioniert, kann ich nicht sagen.
Ich habe keine Möglichkeit für "einfügen" o.ä. gefunden.
other users are still remembering when Kemper sold a product and later revealed they had intentionally held it back
First sold, then held back?
What do you mean by that?
Ich möchte die RIG Reihenfolge im Rig Manager für meinen Kemper Player ändern.
Welche Version vom Rig Manager und welche Firmware vom Kemper Player verwendest du?
The mic becomes your default ears when profiling.
I assume you have the following signal chain: Microphone -> Mixer -> Kemper
If yes, at what level do you output from the mixer?
Yes to everything...
That would explain why most profiles on Rig-Exchange are useless.
Could it be said that a good recording results in a good profile?
I can't find a level indicator for adjusting the microphone level in the Profiling Assistant.
With the beta version 14.x of the player, I was able to create profiles.
I have read the corresponding chapter in the manual.
I have some questions about this that were not answered there.
The first questions concern the microphone.
Does it matter at what distance, angle, and position relative to the membrane the microphone is set up?
Does it matter which microphone is used?
Does it matter whether I use a preamplifier or connect directly to the player?
When recording with a microphone, proper levels are important; how is it with profiling?
Do these parameters affect the sound and quality of the profile?
