Ich habe das gleiche Problem. Für eine Lösung wäre ich sehr dankbar.
Posts by rma_100
-
-
Display More
For those interested in the battery powered option.
Based on the KPP specs you need 9 or 12 volts and 24 watts, center negative. That's
Power / Voltage = Current
24 W / 9 V = 2,67 A
24 W / 12V = 2 A
12V Ripcord won't work because they only provide max 1A
Birdcord PD>12V will work since it provides up to 3A but be careful IT'S CENTER POSITIVE, you need to buy this adapter to reverse the polarity. Also the barrel is not exactly the 2.1mm required size it's 2.5mm inside, it might work but you can get this adapter to make sure is making good contact
You can also use the Birdcord PD>9V it accepts up to 3A so it should be fine with the 2.67A required when using 9V. This one is center negative, no need to reverse the polarity but you would still need the small adapter to convert from 2.5mm to 2.1 mm inside the barrel.
When it comes to the power bank, make sure it can deliver up to 3A through the USB port.
Spoiler alert: if you don't use enough current to power your device, 2A or 2,67A depending on the voltage, you can fry it. The specs provided by manufacturers always have some security buffer, it might work with less current but then you are taking some risks.
You can always provide more current (A) that's ok, the device will use the amount it needs, but never provide less current than the recommended.
The Birdcord PD-9V does works for me. No need for the barrel adapter neither. I use it either with a PD-Powerbank (20.000 mAh), or a PD Apple charger. BTW, I use the USB-A out from the player with the USB-A to 9V adapter, also Birdcord, to power my Shure Wireless. (9 Hours). Can't get a more portable flyrig than that.
-
Perhaps you are reformatting the sticks, plugging the sticks into the unpowered Player and immediately initiating the backup process!? That doesn't work!
Plug the stick into the Player once before while it is running. The Main Manual refers to this as a "prepared USB flash drive".
Thank you Burkhard. That did the trick to me. Maybe this should be mentioned in the manual.
-
On my Mac the path of the Rig Manager Folder is Finder = iCloud Drive = Documents = Kemper Amps. Within that folder are 2 folders namely RigManager and Documentation. The RigManager folder contains the auto backup of the Rig Manager. Is it possible to change the main folder (Kemper Amps) to a different directory?
-
Can someone enlighten me if this is possible. I use Button 1 of the Player to call up my clean tone in Rig A Slot 1. I use Button 3 to call up my lead tone in Rig A Slot 2. For boosting up each of those channels i use Button 2 of the player engaging a clean boost pedal after the power stack. How can I Programm the player to hit Button 1 twice to engage a delay pedal for my clean tone, respectively hitting Button 3 twice to add a delay for my lead tone?
-
Birdcord PD ➔ 9V (USB PD Voltage Converter) | Songbird FX
This is what i am using. Works like a charm. I can power up my Kemper Profiler Player from any PD Power Bank or PD Charger.
-
https://www.amazon.de/dp/B0CJFC11R5?ref=ppx_yo2ov_dt_b_product_details&th=1
This is what i got. The Player fits in perfectly.
-
Is there a Bag or Case that I could carry my Player in? Preferably including a pouch for power supply.