Posts by Camzouille

Nevermind i got it, do you know if it controls the freeze from the reverb or from the delay tho ?

Thanks anyway for the answers

Quote from keuneke

the Player Manual states that you can control Freeze via MIDI using CC#35. Any value sent toggle between freeze activated and deactivated.

Isn’t that just for the Kemper player ?

I checked a list of Cc for the Profiler Head and didn’t find any but i’ll try Thanks !

Quote from Burkhard

And if you attach an analog momentary switch to one of the PEDAL sockets, you find "Freeze" in the selection of function which can be assigned.

Could you please translate what you just said to me haha ? Looks interresring but i did’nt get the idea

Quote from BillyNoSocks

im sure you can do it with midi, but you can also function assign delay or reverb freeze down in the rig settings.

How you you do so ? I i go to Rig then to the control assign page it looks like it's only for the Kemper remote, not for any other externals

Cmon, there must be a solution to use it with an external pedal

Hey there,

Just using my kemper and i was trying to figure out a way to use the "freeze" thingy on the reverb or on the delay.

I know that i can click it from the Kemper itself or even from Rigmanager, but i'd like to be able to on/off it with my external pedal.
I know it's possible with the Kemper Remote, but i'd kike to know if there's a control number affected to it so i can use one switch as a "Freeze" Pedal.

If someone as a way, or any ways to do that, i'd be glad.

It's connected as you said.

I think the problem is coming from my even my computer (but it plays it well with the built in speaker), the cable i'm using (mono jack 3,5 to 6,3) or with the pedal or pedal settings.

I tried to switch to another cable (stereo 3,5 to 3,5 + and adaptor 3,5 to 6,3 stereo aswell), didn't work.

Looks like there's a stereo link setting in the pedal but it's not fixing the problem.

I'll see, at least the most important part is fixed thanks to you !

Hi again,

Wanted to say that i figured out your solution, thank you very much !

I was trying to do that, but i had the main and monitor output on aswell, which were giving me the guitar sound when i was using the "fake bass".

Once again thank you very much.

One more problem to go now, it didn't fix the part where i'm not earing both sides of some songs such as 505 and Sgt Peppers.

Quote from Kemper Support #1

instead of using the FX loop in the reverb module you could assign Master Mono as the output source for the direct output and use that to send the full signal chain in mono to your looper. Then connect the Looper outputs to the return and alternative inputs of your Profiler and set the desired output level for the looper signal on the Aux in page in the output menu of the Profiler.

Hey there,

I'm trying to do what you said right now, but i can't really get it, could you explain it to the dummy i am ? It would be wonderfull if it worked !

Thanks for answering anyway

Hey there,

I posted a few month ago looking for a way to setup my stuff. Some of it was working, but the other part was not so here i am again.

I’d like to be able to plug the Boss RC 600 (looper) to my Kemper, right now i’m using the send input and the return output + the « loop » effect on the Kemper’s reverb block.

First thing is that like that, i’m earing my guitar twice, one with the dry signal (i guess) and the other one with the wet signal.

I can experiment that specially when i’m using a « Fake bass » effect on the Boss RC 600 :

While doing that, i’m able to ear the signal of the modified guitar to a « fake bass », but i’m also earing the sound of the guitar itself.

It would be beautiful if that « normal » guitar sound could go away, so if you have a solution for that, i’m up for it.

I think i have a similar problem without any effects coming out of my Boss RC 600, it’s like there’s way too much reverb, almost like if it was repeating itself.

Second thing is that, to my Boss RC 600, i’ve a computer plug to one of the instrument input, to ear music and stuff.

But voilà, when i’m playing songs that are using the stereo feature « Sgt peppers », or « 505 », i’m only getting one side of the sound. Like if mono was selected instead of stereo, don’t really know how to say it.

I’ve tried many things, switched cables, re arranging the setup and all, but i can’t find any solution.

All i know is that when i plug a headset to my Boss RC 600, i got both side, and when i’m plugging a monitor speaker to it, i only have one.

I was trying to find solution around the « Monitor stereo » in the output section, but i can’t use it since i’m using the looper (at least looks like it to me)

If anybody got ideas about thoses two things anyway, i’ll test them and hopefully find a solution.

Hope it was a clear enough description, feel free to ask anything, i’m up for trying and understanding !

Quote from Kellerblues

With the Head you can't use the FX Loop and the Aux input at the same time. At best get a small/inexpensive 4 channel mixer (2 times stereo) to mix in the turntable and put the RC 600 in the FX loop of the KPA.

Main outs to the Mixer/HS 5 and Powered out to the Kabinet

Yeah i was thinking about doing about the same with my scarlet4i4, and i got the amp that goes with the turntable but it's an 80's amp/turntable thingy. But the goal was to get rid of the soundcard and use the kemper as a soundcard for all.

Your thing should probably work, maybe you have a model recommandation ?

Still wondering about the amplification of the turntable if i don't use the amp. I tried to put the turntable into my RC600 second "Instrument Input", just like how it's plugged to the Kemper to get the guitar sound, but it doesn't work either, can't really get why for now. No sound if the RC600 is in Line mode, subtle sound if i put it on instrument level. Maybe it doesn't amplify enough.

Quote from Michael_dk

how so? It’s not just an issue of simple amplification

I get what you're saying, it might just be what i was explaining right up with the RC600 on instrument level that doesn't amplify the signal enough for it to be at a normal volume.
But if it's that, i'd rather buy something to amplify my turntable and then put it into my RC 600 on line level (since it's amplified before) right ?
If that's the case, i already got the old amp that goes with the turntable, but the Outputs are old (non amplified) speakers wires, like you know the little red and black that goes in. I guess i can put a jack or something at the end of it, but i'm not sure about that.

Last thing that worries me if that's the plan is that it would be :

Guitar -> Kemper front input

Main Kemper out -> HS5
Powered Kemper out -> Kemper Kab

Turntable -> the amp that goes with it (If i can tweak the wires from old speakers wires to be 6,3 jack) -> Output of the amp to the RC 600

RC 600 in and out -> alternative rear input (Loop)

And all of that should work if i'm right ? Question was that, is there no risk at having two amps joined like that ? even 3 if i put the RC 600 on Instrument level.
Would be great if that one worked and didn't color the sound (except the one coming from the turntable) and had no risk.

Quote from Ruefus

If you need the RC600 in line with the Profiler, why not run the main outs from the Head into the RC600 and out to wherever. It won't go to the Kab like this, though.

I was plugged right like that before, Guitar to front -> Kemper main out to the RC 600 Instrument -> RC 600 Out to my scarlet 4i4 for the speakers and connection with the computer.
As you said with that setup the sound does go to the Kab, and i tried by plugging the Kab to my RC600 and it doesn't work even at Instrument level. Was a thing tho, but not working for what i'm trying to do !

Anyway thanks again for the answers guys, i'll rebuild the setup in the next few days so if you got more infos/recommandations, i'm taking them all !

Hello there !

I'm re doing all of my setup and was wondering a few things about the way it could go.

Basically me setup is composed of : Powered Kemper, Kemper Kab, Pair of HS5, a Boss RC 600, a computer, and a turntable.

What i'd like to do if that's possible is to use my Kemper as an Audio interface (since it's possible) and have it run my computer sound, my turntable sound, and be able to play the guitar at the same time, with if possible my RC 600 in the way so i can do loops and others too. All of it getting out into the HS5 and into the Kemper Kab. I've a wireless headset to plug somewhere aswell but i think thise one should be fine.

So i'm looking for a way to set this up, if you guys have any ideas.

I tried and manage to get my computer sound, the guitar and the RC 600 (Not sure for this one, but i believe) working together, the one missing being the turntable (it's not an amplified turntable if that exist, just an old one). Maybe and just maybe i need an extra spot for a mic to go on Discord and stuff, but i think i can plug that to my RC 600.

Anyway, thanks for sharing your ideas of setup with that if you got some !

If anybody is having kind of the same setup please reach, i'm having trouble to get this all work together by reading the Manual.

I think i figured it out.

U meant to use the last effect box as a loop, plugin the RC 600 to the rear send and return i guess ?

Seems to work that way, thanks for the help !

Quote from Wheresthedug

I would put the RC600 in a loop on the Kemper. If you want to capture all the Kemper FX including Reverb and Delay then place the Loop in the Rev slot. If you want to capture playing without Rev and/or Delay place the Loop earlier in the FX slots.

What do you mean the loop in the rev slot ? I don't really know how to plug the thing that way.

Hello there !

I've just bought the Kemper Kab (Non powered) to go with my Powerhead.

Before that i was just using my Kemper with a boss RC600 and the monitoring speakers plugged to my computer. Was plugged just like that : Guitar to front input/Both XLR main outputs from the Kemper rear to my boss RC 600 IN/Both RC600 OUT to my audio interface that is plugged to the computer and monitoring speakers.

Thing is now, i got the Kemper Kab to add to that so it cannot be plugged like that.

I managed to do another setup which was : Guitar to front input/Both XLR main outputs from the Kemper rear to my boss RC 600 IN/Both RC600 OUT to the Kemper rear "Alternative Input", and i had to turn the "Aux monitor In" insite the Output Menu.

I get the sound from everywhere (Kemper Kab, Computer and tho monitoring speakers) but the problem is that i got some noise coming with it on the Kemper Kab.

So i was wondering if anyone had a setup including a computer, a kemper kab, and a looper with it, or any others propositions !

Thanks and have a great day.