I had the Tonex before the Player and the Nano Cortex goes exactly in that direction. Also with the limited FX.
Sound wise the Tonex is fantastic, I don't know if the Nano Cortex can be that much better for that price. For sure, it's not a Player competitor especially when the paid update is coming out. It would have been cool to be a small, bit limited Quad Cortex unit like Headrush with its MX5
Hallo Lemonking,
Du kannst den "FX1" in System auf einen der drei Schalter legen (z.B. den Mittleren) und dann im Rig den FX1 (Assign FX1 unter den Drei Punkte Menü) dem Pure Boost zuweisen.
Wäre die einfachste Methode falls du FX1 und FX2 nicht schon anderweitig vergeben hast.
Schöne Grüße
Bernd
Hello Paul,
Your hint was helpful! So the Wrap settings seems to be the issue indeed.
But I did not change it to the settings you describe in your post.
I changed them all to "No Wrap" and then back, now it works.
I have now "Keep Slot" - "Wrap on up" - "Wrap last"
Thanks you!
Rig Manager Version: 3.5.27
Kemper Player OS: 10.9.7.52289 Public Beta
After an Update without any reset.
When Switching Banks, the Player jumps back to Bank 1 (blue). The bank itself stays, so e.g. selecting Bank 3-3 it jumps immediately to Bank 1-3
That happens (tested) with iOS, Android, Windows Rigmanager and the onboard Stomp switches.
After reverting back to old, former OS all is fine again.
Hello MetalMauce,
The Player uses slots A, B, Delay and Reverb and ‘drops’ the other slots. Same with not available effects. Reverbs not available get converted automatically to Easy Reverb.
You will have to check each rig manually to be sure it will still work the way you want to.
Just measured it today. Max I saw was 820ma during boot. Pic below
When just playing it was aprox 600ma.
Hello gochiararia,
But that meassure is only running the Player? You did not meassure while charging an iPad over the Player's USB as it is suggested in the manual?
Would be interesting to see how much it draws then.
Best regards, Bernd
It's the simplest thing in the world: Take any off the shelf USB stick and plug it into the Player while it is running and it's ready to be used.
Then this is not sooo clear in the manual for a Kemper Noob like me. That "Take any off the shelf USB stick and plug it into the Player while it is running and it's ready to be used." should be included into the Player Backup section in the manual. Just for some dummies like me 
as soon as the lights start moving you can release the buttons. When the LEDs return to their normal state it indicates that the backup was done.
That way it worked just fine. I just pressed too long and the the green light with flashing yellow came up (whatever that means).
Thank you!
No, but I'm interested in this topic. Can you not just connect it to RM on a PC and do a full backup that way?
Actually no. Full Backups can only be done via USB key. With RM you can just exchange and backup your rigs.
I try to get consistent backups on USB Key on the Player. I only get it sometimes working. The manual says:
"To do so, please plug the prepared USB flash-drive into your PROFILER while it’s
unpowered. Press and hold the BANK button while powering on."
I don't really get it ho long to press and when to release. At the "Banks" button there comes a white light, then green and then green yellow.
Can't find any description to that lights and how long to press to get a backup.
Anyone figured out yet?
I used out of curiosity a normal AC adaptor with 9V/1A laying around in my drawer and it works.
This given, I would say to combine 2 x 500mA on a pedal board power supply should work.
