Posts by Manne76

Manne76 · Kemper and Ground Control Pro Manne76 April 14, 2022 at 9:03 PM

That sounds great. Thanks a lot!

I got the GCP already and I'm picking up my Kemper on saturday and look forward to get them working together.

Manne76 · Kemper and Ground Control Pro Manne76 April 14, 2022 at 12:53 AM

I was hoping to get a SYX file to load to my GCP to work with my Kemper. The original post had links to download this, but the links are not active and working anymore.

Manne76 · Kemper and Ground Control Pro Manne76 April 13, 2022 at 11:43 PM

Hi,

Reply to an old post here, but do you still have syx file available for using GCP with KPA? The links are not working anymore. I'd like to use my GCP with my Kemper.

Thanks in case you see this.

Manne76 · Kemper and Ground Control Pro Manne76 April 13, 2022 at 11:38 PM

Quote from tijlcarrein

Hi you all.
If anyone is interested, i've inluded a link to the SYX file for using the Kemper Profiling Amp in performance mode.
http://www.fixxxer.info/img/kemper/kemper_gcp.syx
Please feel free to use the formidable editor to adjust the syx-file to your liking.
https://gcproeditor.com/
Midi Channel is set to 1
I have setup 7 banks (bank 0 to bank 6) with 4 slots each and mapped the correct program change to match the 5 slots Kemper layout to the 4/10 button setup of the Ground Control Pro (the fifth Kemper slot is deactivated on the Kemper performance)
Each bank is:
- 1: Clean
- 2: Rhythm
- 3: Lead I
- 4: Lead II
Pedal 1 is active and mapped to CC 1 for wah (with the amazing auto-engage from Kemper).
Pedal 2 is active and mapped to CC 7 for volume
The instant acces buttons:
- IA 1: Kemper Tempo - CC30 - Momentary >> to allow the excellent beat scanner and correct tap-tempo for the Kemper)
- IA 2: Kemper Stomp D - CC20 - Latching
- IA 3: Kemper Stomp X - CC22 - Latching
- IA 4: Kemper Morphing - CC11 - Latching
- IA 5: Kemper Mod - CC24 - Latching
- IA 6: Kemper Delay (with tails) - CC27 - Latching
- IA 7: Kemper Stomp B - CC18 - Latching
- IA 8: Kemper Stomp C - CC19 - Latching
To enable the import to your GCP, you need to use Midi Mon and use the Send Syx function which will allow you to upload the attached syx file to your Kemper
http://www.fixxxer.info/img/kemper/MidiMonSetup.exe
Hope this is usefull for someone.
I do this because ot the excellent customer service provided by Voodoo Labs! ....and because i'm still saving for the Kemper remote
Kindest of Regards,
Tijl - Belgium
[Blocked Image: http://www.fixxxer.info/img/kemper/kemper2.jpg]
[Blocked Image: http://www.fixxxer.info/img/kemper/GroundControlPro.jpg]

Display More