You need to balance at Gig volume. Trying to balance at home on headphones by yourself will not produce the results you want. Also start with the rig Crunch at a rehearsal or jam and adjust your levels with your ears. Watch your EQ, what sounds good at home will not translate to a loud live stage

I own M2 this is what I use

#CC 47 value 0-127 to access all 125 performances

Followed by CC 50-51 FOR SLOTS 1-5 VALUE 1

Feel free to ask me anything it will be alot easier then long winded answers that only confuse

I have set up EPs to controll everything. Wireless.

Also controlling H9 and H90 with the same unit.

I also can transpose or controlling any switch or command on my pedals

CC99 V-4

CC98 V-4

CC06 V-0

CC38 V-65 Changing this value will change the transpose function in the Rig Section

run this sequence to access the NRPN values and commands

V66=+2

V65=+1

V64=0

V63= -1

V62= -2

You can go as low high as you want

Thank you

I understand you need to use NRPN but the page address is (0x04) which is #CC 4 which is used for the pedal.

I'm using a MIDI Captain to change to different rigs which gives me more flexibility.

I would like to use one rig yet set up the MC to change the Transpose function in the rig module.

The documentation is not clear. What is the actual process or sequence of commands.

#CC 32 BANK SELECT Val 0-4

#PC xxx program (0-127)

# CC (?) To select the Transpose Function Val (?) to select the range

The MC allowes me to send up to 12 commands per button.

I would like to control the transpose function by MIDI using a MIDI controller.

I’ve looked through the Manuel and midi documentation but it only mentions #CC 4 which is for the pitch pedal.

I would rather use the transpose function in the Rig module.

Thanks GPmn

No need to use a DI box to FOH

that's what XLR outs are for.

1/4 are used to send to your monitors.

yes you can lock any effect

My stage and the Case come in under the 50lb weight limit

you mentioned you live in a complex.

Did you take you rig to another location and test it.

If the noise is gone, the electric powering you complex is dirty somewhere on the line.

Could be another building which is on the same grid.

Worked a club and they had dirty power nothing could be done about it.

I usa a MIDI captain 10 switch

It's easy to program

the SKB and the Kemper weight in under the 50lb weight limit.

Flown many a gig with never a problem

Plus you can lock with a TSA lock.

I use this you can check it or carry-on

SKB 3i-2015-7KPS iSeries Kemper Profiler Stage Case

good reason to have a separate page for the player

Will cut down on the confusion

Plus what is revelent to one is not to the other

You must be the original author of the rig, amp, cabinet and profile, in other words, please do not upload other people's work.You must be the original author of the rig, amp, cabinet and profile, in other words, please do not upload other people's work.

ok when I get home

I have a copy. Don’t know if I can post it but DM

Un-Link Main out from the Master Volume

Set Main Volume to 0db turn on the -12Pad

I use Rig volume to match Rigs