Multi Powerbank for Profiler Player

Quote from rma_100

The Birdcord PD-9V does works for me. No need for the barrel adapter neither. I use it either with a PD-Powerbank (20.000 mAh), or a PD Apple charger. BTW, I use the USB-A out from the player with the USB-A to 9V adapter, also Birdcord, to power my Shure Wireless. (9 Hours). Can't get a more portable flyrig than that.

Cioks 4 expander

Cioks 4 expander, professionelles, ultrakompaktes Multi-Output-Expander-Netzteil für Effektpedale, 1-Zoll-Profil (25,4mm) wie Cioks DC7, extrem störungsarm…

www.thomann.de

If you want to use a multi power supply and still want to be able to use a powerbank.

Cioks 8800 Parallel Adapter Flex

Cioks 8800 Parallel Adapter Flex, kombiniert die Stromstärke von zwei Ausgängen, kann in Kombination mit CIOKS Standard Flex Kabeln verwendet wenn eine höhere…

www.thomann.de

You need this to power the player.

I do own and use the Falken on my board, it is not a reliable solution to power the Player.

While it is possible to power it up and make it run without drop of power, it WILL introduce a massive amount of noise.

I've tried everything I could think of except putting some kind of noise isolation device between the power bank and the Player.

Nope

I saw the Know Your Gear guy on YouTube using the D'Addario power bank solution for pedalboards and a Kemper Player, however when I asked D'Addario they answered that it could not work reliably...

D'Addario Xpnd power bank

I also asked Thomann about this unit and the answer was the same :

HB Powerplant power bank

I personally gave up and just use the original power supply, anyway I need a power strip for my power amp.

There's a few of those noise isolator whatever products around, this one seems to work well from what I read :

Joyo noise blocker

Quote from MariaKim

Ì am not 100% sure with this setup. The Cioks has max 660mA, so I would need like 4 of these outputs connected with these adapters to get 2A.

It’s been discussed before, the player does NOT need 2A. I think 1A at bootup and less than that to operate. 1 of the Adapter will give you 1320 mah. Been gigging for a year with it without a problem.

Player startup current is around 1A, working current is around 0.6A

Is everything working without any issues? By the way: I am using the following device: https://www.thomann.de/de/walrus_audio_canvas_power_hp.htm No Issues.

For my live setup, I use an USB-C to 9v Step-Up Adapter by myvolts and their small power supply. 
https://myvolts.com/StepUpPower

Sometimes, I hit it up with my cheap power bank for extra small gigs when I feel super lazy... that also works pretty well.

Also, the player takes much less current than described.