Effect Button I-IIII cycle option.

    The Profiler Model referred to in this thread is ...
    ☑️ Profiler Stage

    I would like the ability to assign 2 different effects to the switch, and cycle between 3 states -

    1. off
    2. Effect 1 on
    3. Effect 2 on

    This would add a lot of flexibility without adding more switches. Here are a few examples of how I would use this:

    Delay - I would set up 2 delays, one for dotted 1/8th and the other for 1/4. Now I can easily cycle between no delay and whether I want dotted 1/8 or 1/4 delay with only 1 switch instead of needing 2.

    Modulation - I use tremolo and chorus quite a lot but almost never at the same time. I would be able to put both on on switch and toggle between nothing/trem/chorus with only 1 switch instead of needing 2.

    I came up with a workaround for two delays which you might find useful in some situations.


    I have delay 1 set up as a quarter note solo delay and delay two set up with the Andy Timmons Halo style dotted 1/8 and quarte in series.

    Switch IIII is set up to toggle between which delay is active.

    Morph pedal is set up to control Mix of the second delay.

    With delay 1 active you get a full on solo delay all the time but then you switch to delay 2 you get the Halo,effect with no mix (or some other low setting of your choice). You can then control the Halo mix with the expression pedal on real time as required. Obviously doesn’t work if you already need morph for something else in the rig but it might be useful depending on your setup.