Fx Loop already used for pre amp effect, how to plug post ones?

315ea75b3a1edca04b66d0d49de1e7e757bfdcd5 · March 5, 2017 at 11:25 AM

Hello,

I'd need some tips about using external effects with the Kemper.
I'm using some OD pedals into the fx loop to get a chain like like this :
Slot A : Wah
Slot B : Comp
Slot C : Fx Loop with OD stomps

But I also have a EHX Freeze and a Jamman that I would like to run after the amp.
As I'm running stereo from XLR outputs, how can I plug the EHX & the Jamman to make them run after the amp?

Thanks guys !

Vivz

karlic · March 5, 2017 at 1:09 PM

You cannot configure the loop on the Kemper to be both pre and post at the same time. The only option I can think of is to incorporate something like the Rocktron Patchmate Loop 8 to deal with the pre effects and leave the Kemper loop for post preamp stuff.

This would all be midi controllable still:

http://www.rocktron.com/patchmate-loop-8.html

315ea75b3a1edca04b66d0d49de1e7e757bfdcd5 · March 7, 2017 at 10:39 AM

But I can't keep my od stomps between Kemper Wah/Comp and the amp profile like that :-/

paults · March 7, 2017 at 3:23 PM

You can send the KPA Output to a stereo mixer, and use the FX sends of the mixer to send the KPA signal to the Freeze and Jam Man.